Office Portable Toilets

About Office Portable Toilets

PORTABLE TOILETS: Toilets with Indian, European and Anglo-Indian W.C. seating arrangement are available with comfortable and ergonomically designed layouts. Extra care goes in selection and usage of flooring and wall paneling materials to yield hygienic and leakage free operation of the toilets.

MAIN SHELL: The main fabrication of the structural frame work shall be integral & all welded type to comprise of the bottom frame, overall frame work, internal, external cladding with insulation and other peripherals.

BASE FRAME: The main bottom (Base) frame is fabricated and welded M S pressed steel channel sections/rolled steel channel sections, and all the inter connecting cross members shall also be of steel channels duly welded lengthwise & breadth wise and conveniently equispaced.

FLOORING: 16 MM Thick Cement bonded Particle Board shall be fixed with suitable fasteners to the bottom frame.

SIDE & END WALLS: M S Pressed steel vertical corrugated sheets of 1.2mm and shall be welded to the bottom M S Channel frame, corner posts, top frame & roof frame. The corrugated version acts as stiffeners and increase strength to weight ratio & eliminates the use of any other vertical supports.

ROOF: The roof shall be made of 1.2mm thick plain MS. Steel sheets and is provided with adequately reinforced sections from inside for additional strength and this shall be able to comfortably resist loads.

INNER PANELING: 8mm thick PVC boards 

DOORS: Doors shall be of 6 ,6 inchx 2. The shutter shall be opened inside.

PRETREATMENT & PAINTING: One coat red oxide and final coat epoxy paint two coats.

ELECTRICAL: All wirings shall be concealed type inside the paneling and shall be of PVC insulated copper wire of ISI quality in PVC/Reinforced steel Flexible Tubings / Conduits of I S I grade. All switches and sockets shall be of I S I medium quality.

PLUMBING: All materials like pipes, commodes, taps are used I S I Medium quality.