|Home||» Products||» Portable Containers|
We are a coveted manufacturer and supplier of premium quality Portable Containers that are widely used at construction sites. These are available in diverse sizes and designs as per the requirements of our clients and can easily be shifted from one place to another. The offered containers are fabricated in sync with the international norms using optimum grade raw material and advanced technology by our experts. Further, these Portable Containers are meticulously tested by our quality controllers on a series of parameters to ascertain their perfectness.
Resistant to adverse weather conditions
Durable finish standards
Portable Containers are available in standard sizes of 20ft x 10ft and 40ft x 10ft.
Office Cabin: We design and fabricate site offices as per the clients' requirements. These site offices are completely safe and are easy to install. Fabrication is done keeping in mind various other factors like usage of space, ventilation and safety.
MAIN SHELL: The main fabrication of the structural frame work shall be integral & all welded type to comprise of the bottom frame, overall frame work, internal, external cladding with insulation and other peripherals.
BASE FRAME: The main bottom (Base) frame is fabricated and welded M S pressed steel channel sections/rolled steel channel sections, and all the inter connecting cross members shall also be of steel channels duly welded lengthwise & breadth wise and conveniently equispaced.
FLOORING: 16 MM Thick Cement bonded Particle Board shall be fixed with suitable fasteners to the bottom frame.
SIDE & END WALLS: M S Pressed steel vertical corrugated sheets of 1.2mm and shall be welded to the bottom M S Channel frame, corner posts, top frame & roof frame. The corrugated version acts as stiffeners and increase strength to weight ratio & eliminates the use of any other vertical supports.
ROOF: The roof shall be made of 1.2mm thick plain MS. Steel sheets and is provided with adequately reinforced sections from inside for additional strength and this shall be able to comfortably resist loads.
INSULATION: 50 MM Thick mineral glass wool
INNER PANELING: 8mm thick Pre laminated boards
DOORS: Doors shall be of 6Ã¢â‚¬â„¢6Ã¢â‚¬ x 3Ã¢â‚¬â„¢. The shutter shall be opened inside. The main door shall be with MS Door of 30 mm thick filled with PU Foam and both sides will be painted with suitable color.
WINDOWS: Aluminum anodized extruded section of suitable size and shall be of sliding type fitted with clear glasses. Mosquito nets shall be provided on suitable framework & anti pilferage MS grills shall also be provided.
PRETREATMENT & PAINTING: One coat red oxide and final coat epoxy paint two coats.
ELECTRICALS: All wirings shall be concealed type inside the paneling and shall be of PVC insulated copper wire of ISI quality in PVC/Reinforced steel Flexible TubingÃ¢â‚¬â„¢s / Conduits of ISI grade. All switches and sockets shall be of I S I medium quality.